Vitorond 200: cast segment boiler

Especially in older buildings, there are often cramped and therefore difficult insertion situations. With the Vitorond 200 cast segment boiler, the segments can be individually inserted into the boiler room and easily assembled on site using a pressing tool.

Benefit from these advantages:

• Low-temperature oil/gas boiler, 440 to 1080 kW
  
• Economical and environmentally friendly due to sliding lowering of boiler water temperature
  
• Standard efficiency with fuel oil: 88 % (Hs)
  
• Three-pass boiler - thus low-pollution combustion with low emissions
  
• Eutectoplex heating surface for high operational reliability and long service life - the homogeneous structure of the special eutectic cast iron ensures uniform heat flow and prevents stress cracks
  
• Simple and fast installation of the individual cast segments due to double groove system with elastic sealing cord for permanent sealing on the heating gas side
  
• Problem-free installation due to segmental construction and low transport weight of the individual segments
  
• Increase in standard efficiency of up to 12 % through use of condensing technology with stainless steel Vitotrans 300 flue gas/water heat exchanger
  
• Easy to operate Vitotronic control unit with colour touch display
  
• Integrated LAN interface for internet communication and integrated WLAN for service interface
  
• Economical and safe operation of the heating system through Vitotronic digital control system with communication capability. Standardised LON-BUS enables complete integration into building management systems
  

Vitorond 200 VD2A - fits through any door

Benefit from these advantages:

• Low temperature oil/gas boiler, rated from 125 to 1080 kW
• Use of condensing technology with Vitotrans 300 stainless steel heat exchanger for up to 12 percent higher energy yield
• Cast sections provided with permanent seal on the hot gas side by double groove system with resilient packing cord
• Pivoting the burner door gives easy access to the combustion chamber from the front, for cleaning
• Remote monitoring via the internet with Vitocom and Vitodata

Recommended for modernising older buildings

Tricky narrow entryways in older buildings present a particular challenge when modernising their heating systems. The Vitorond 200 sectional cast iron boiler is ideal for this.

Its sections are brought into the installation room individually, where they are easily and quickly assembled with a compression tool.

The Eutectoplex heating surface is made from special homogeneous cast iron. The even cooling of the material protects its shape and geometry. This prevents structural stresses right from the start,

resulting in high operational reliability and a long service life.

Convenient and highly capable control units

Economical operation of the heating system is ensured by the digital Vitotronic control unit.

The Vitotronic 300-K is a particularly powerful version for multi boiler systems comprising up to four individual boilers with modulating boiler water temperature. The Vitotronic 200-H regulates up to 96 additional heating circuits.

Integration into building management systems is possible. The TeleControl system with the Vitocom and Vitodata is available for remote monitoring via internet.