Vitocell 100-L
Vitocell 100-L

DHW cylinder

Cylinder for DHW heating systems with cylinder loading system, cylinder capacity: 500, 750 and 950 litres.

Corrosion-protected cylinder
Additional cathodic protection
Low heat losses
Combination with condensing boilers

Your local Viessmann trade partner can provide you with personalised advice

Find a trade partner now
Corrosion-protected cylinder

Steel with Ceraprotect enamel coating

Additional cathodic protection via magnesium anode

Impressed current anode available as an accessory

Low heat losses

Thanks to highly effective all-round thermal insulation

Combination with condensing boilers

With optional Vitotrans 222 heat exchanger set as a cylinder loading system, particularly suitable for combination with condensing boilers

Removable thermal insulation

For easier handling

Immersion heater and heating lance as accessories

An immersion heater and heating lance for use in conjunction with heat pumps are available as accessories

Accurate cylinder heating

Even with modulating flow temperature

High efficiency cylinder loading and heating water pump

As well as with full thermal insulation

Energy efficiency class: B

Type CVL, 500 litres

Vitocell 100-L with separate Vitotrans 222 heat exchanger set

By adding the Vitotrans 222 (80, 120 and 240 kW) supplied as an accessory, the Vitocell 100-L forms a cylinder loading system for DHW heating. The heat exchanger set consists of a plate heat exchanger, fittings and pumps as well as thermal insulation.

Vitocell  100-L in  application

The system is ideally used for the following applications and conditions:

  • Short-term peak loads, i.e. high draw-off rates and varying reheat times, e.g. DHW heating in swimming pools, sports centres, industrial enterprises and abattoirs
  • Large cylinder volumes with offset heating and draw-off times, e.g. where water is drawn off at peak times in schools, sports centres, hospitals, army barracks, council facilities, apartment buildings, etc.
  • Heating circuits requiring low return temperatures or where the return temperatures are limited, e.g. for district heating or condensing boilers. The wide DHW spread leads to a low return temperature on the heating water side; this brings advantages through high condensation rates when utilising condensing technology.
  • Where space is limited, as the cylinder loading system can transfer a high output.

Product details

Cylinder capacity
  • Type CVL: 500  litres
  • Type CVLA: 750 and 950  litres
Energy efficiency class
  • Type CVL: B
Product cross-section Vitocell 100-L type CVLA (950 litres)